Among the dot pattern knurling cutters of various types, such as silicon dot pattern knurling cutter, mechanically driven dot pattern knurling cutters, dyeing dot pattern knurling cutters, printing dot pattern knurling cutters, steel dot pattern knurling cutters, mining dot pattern knurling cutters, chemical dot pattern knurling cutters, sewage treatment dot pattern knurling cutters, woodworking dot pattern knurling cutters, polyurethane dot pattern knurling cutters, printing dot pattern knurling cutters, PU dot pattern knurling cutters, etc., when using them, it is also necessary to pay attention to the maintenance of the products.

1. The correct method for using dot pattern knurling cutters lies in that the internal structure of newly cast dot pattern knurling cutters is not yet stable. If they are put into use immediately, it is easy to reduce their service life. Therefore, new dot pattern knurling cutters that have just come out of the mold should be placed for a period of time to allow the dot pattern knurling cutters to contact the external environment's temperature and humidity, maintaining a relatively stable state. This can increase the toughness of the gel and thereby improve the durability.

2. The dot pattern knurling cutters that are to be used should be cleaned thoroughly, and then wrapped with plastic film to seal the gel. Place them on the dot pattern knurling cutter rack and do not stack several pieces randomly or lean them against the wall by hand. This is to avoid unnecessary damage to the gel. During the transportation of the used dot pattern knurling cutters to the processing and casting site, it is strictly forbidden to throw, place or press them randomly or heavily, to keep the core of the roller from deviating or bending, in order to ensure the normal use of the roller core.

3. Usually, during the operation of dot pattern knurling cutters, it is necessary to keep the shaft head and bearings of the dot pattern knurling cutters well lubricated. If the lubrication is poor and causes wear and gap of the dot pattern knurling cutter shaft head and bearings, it will inevitably lead to the problem of uneven printing ink color. At the same time, it will also cause printing marks due to poor glue jumping and sliding. During daily use, it is necessary to frequently add lubricating oil to the shaft head and bearings of the dot pattern knurling cutters to prevent the machine parts from wearing out the dot pattern knurling cutters and ensure the efficiency and quality of work.

dot pattern knurling cutter https://www.rollerchina.com/knurling-cutter-g-dots.html